Fire Rated Exit Doors in Dubai

Fire-rated doors are designed to serve as a fire-stop or partition, to stop the spread of fire. The design of fire doors allows people to quickly and safely leave the occupied space, usually outside the building. The fire protection structure is used as a fire shield or partition to prevent the spread of fire. Count on a babautomation representative to help you figure out what you need and not waste money on unnecessary materials. There is a difference between fire doors and fire exit doors.

Fire doors are located inside buildings (residential and commercial) and are internal doors that must be kept closed to prevent fire from spreading between different parts of the building. In buildings with many people, they should be installed at the entrance to each individual dwelling, usually leading to a public corridor.

The fire door is the last door on the emergency exit route that should lead to a safe place.

These doors have functionality for rating up to 3 Hrs.

The fire exit door should have Self closing functionality by sensors.

Fire Doors

A fire door is not only a door itself, it is also a door, hardware, wrought iron (latch, handle, etc.) and a frame. It is important to understand that the door can only achieve this goal through skilled door installation using the necessary components and frames. Compatible accessories will be listed on the fire door certificate and must be installed by qualified personnel. Babautomation have the best experienced team for installation of fire doors.

Fire doors are installed inside the building to prevent fire and smoke from spreading from one area of the building to another, so that people can safely evacuate and reduce damage caused by fire and smoke.

In public corridors with different escape routes, fire doors should have glass panels for viewing and opening to show the different locations of the fire.

All fire doors have a fixed device that can be closed automatically, whether by closing the door or triggering a fire alarm by a magnetic or similar device, these magnets will be released.

Fire Exit Doors

The same requirements as above apply to fire doors. If the door is the final exit from the building, there are other requirements.

The door must be opened in the direction of expulsion.

There should not be any locks or buckles. Many people use a push rod system that can be pressed to open the door. If the door is also a safe entrance, the lock/latch should open automatically when the fire alarm is triggered.

The last fire door should lead to a safe place.

It should have an automatic closing method so that the door can be closed to control fire and smoke after expulsion. It can also control oxygen from entering the building and cause a fire.

This sign requires a shining fire exit sign. Located above the door.